Engine Assembly for 4G69: 2.4 L, ≈120 kW — Real-World Notes from the Shop Floor
There’s a quiet resurgence of interest in complete drop-in engines, especially for older Mitsubishi platforms that still have life left in the chassis. If you’re weighing a rebuild versus a replacement, the
Engine Assembly for 4G69 2.4 L 120 kW for Mitsubishi is one of those options that keeps popping up in workshops and fleet chats I follow. To be honest, the “plug-and-drive” simplicity saves time, and time is the most expensive part of any job.
Where it Fits and Why it Matters
The 4G69—2.4 liters, single cam, 16-valve with MIVEC on many trims—showed up in various markets in vehicles such as Outlander, Galant, Lancer variants, and even Eclipse in some regions. It’s a workhorse. Many customers say the swap feels “stronger than a tired rebuild,” which makes sense: fresh tolerances, fresh oil system, and a properly seated valvetrain can do wonders.
Core Specifications (≈ values; real-world use may vary)
| Displacement | 2378 cc (2.4 L) |
| Power (SAE J1349) | ≈120 kW (varies by tune/emissions) |
| Torque | ≈220–230 N·m @ ~4,000 rpm |
| Bore × Stroke | 87.0 mm × 100.0 mm |
| Compression Ratio | ≈9.5–10.5:1 (market dependent) |
| Head/Block | Aluminum head / cast-iron block |
| Expected Service Life | ≈200,000–300,000 km with OEM maintenance |
Quick test data from shop dyno logs: idle oil pressure ≈100–150 kPa (warm), 3,000 rpm ≈300–400 kPa; cylinder compression ≈185–210 psi with ≤10% spread. Emissions readiness depends on the ECU map, cats, and regional specs.
How It’s Built: Materials, Methods, Testing
- Materials: cast-iron block, aluminum head, forged steel crank, moly-faced rings, nitrided journals (varies by batch/spec).
- Processes: precision honing (plateau finish), measured deck flatness, valve-seat machining to OEM angles, torque-to-yield fastener strategy.
- Testing: power rating confirmable under SAE J1349; end-of-line cold/hot test, leak-down, oil pressure curve; ISO 1585 reference for bench methods.
- Quality: built under ISO 9001 and IATF 16949-style QMS; traceability tags and batch records.
Origin: 289 Heping East Road, Chang ’an District, Shijiazhuang, Hebei, China. Frankly, we’ve seen consistent machining tolerance on recent batches—tight but not overly “race” tight, which is good for everyday durability.
Applications and Advantages
- Vehicles: commonly Outlander/Grandis/Galant/Eclipse/Lancer (market/year dependent).
- Industries: passenger vehicles, light-commercial fleets, ride-share/taxi operators.
- Advantages: shorter downtime vs. full rebuild; warranty-backed; predictable compression and oil control; cleaner emissions baselines.
Vendor Comparison (indicative)
| Vendor | Certs | Warranty | Lead Time | Price Band |
|---|---|---|---|---|
| OujiaEngine (China) | ISO 9001, IATF 16949 (factory-level) | ≈12 months | Stock to 3–6 weeks | Mid |
| Mitsubishi Genuine (OEM) | OEM standards, global QMS | Varies by region | Dealer dependent | High |
| Regional Reman Brand | ISO 9001 (common) | 6–12 months | 1–8 weeks | Low–Mid |
Customization and Options
Available (varies): intake manifold orientation, A/C bracket styles, alternator/PS pump options, sensor suites (Euro/USDM), ECU base timing, and crate packaging for overseas shipping. If you need a fleet spec for ride-share duty, ask for upgraded cooling gaskets and a higher-capacity oil pump spring—sounds minor, but it helps.
Field Notes and Feedback
- Taxi fleet in Southeast Asia reported 2–3% better fuel economy than a high-mileage core; smoother idle after ECU relearn (anecdotal, but consistent).
- Independent garage in Auckland: installation took ≈7 hours; no re-pin of harness; post-install compression even across all cylinders.
If you’re comparing, weigh total cost of downtime. A fresh Engine Assembly for 4G69 2.4 L 120 kW for Mitsubishi may look pricier up front, but fewer callbacks (and happier customers) tend to balance the ledger. Actually, that’s what keeps me recommending it.
Authoritative References
- SAE International — SAE J1349 Engine Power Test Code: https://www.sae.org/standards/content/j1349/
- IATF 16949 Automotive QMS Overview: https://www.iatfglobaloversight.org/
- ISO 1585 Road vehicles — Engine test code: https://www.iso.org/standard/65514.html
- Mitsubishi Motors Global Service/Technical Information (regional portals): https://www.mitsubishi-motors.com/en/afterservice/
Oujia has been providing the professional engine parts for 17 years.connecting rod As a reliable supplier and partner, Oujia focuses on various engine parts, especially on gasoline engine parts and on diesel parts for passenger cars.exhaust valve Oujia not only provides high and stable quality and excellent services to our customers, but also provides long-term self- brand creation and OEM services for our overseas customers.engine assembly Our company products mainly include: engine, cylinder head, cylinder block, crankshaft, piston, piston ring, intake valve, exhaust valve, timing kit, gasket set, connecting rod, crankshaft bearings, connecting rod bearings, intake camshafts, exhaust camshafts, water pumps, oil pumps Etc.piston kit focus on the aftermarket, our products are guaranteed for 100,000 kilometers.Our products are exported to Germany, Russia, Brazil, Japan, the United States, and the Middle East. We are a trading company. We choose the most stable quality factories in China to cooperate with. We cooperate with 7,600 factories in China and sell 74,000 products each year. , we have 26,000 models in stock.gasket set manufacturer|super blog